The UK Dart 15 Association

Dart 15 Forums

Dart 15 Association

Comments on this site are not necessarily the opinion of the Dart 15 committee.
Comments are not moderated and people's screen names may not be accurate.

Skip to content

Help! Anyone have a trailer design for boat broken down [Kei

Dart 15 Chat
Post Reply
Archive
Archive
Posts: 12542
Joined: Thu Dec 14, 2006 9:12 pm
Location: From the old forum

Help! Anyone have a trailer design for boat broken down [Kei

Post by Archive »

Keith 1840 wrote:

I remember that Dart 18 early trailers used to have the boat broken down and I want to have one built so I can break the boat down and keep the boat at home. Has anyone designed their own or have one?

The main design question is - can you put the hulls on top of the box without it becoming top heavy - many thanks.
Top
Archive
Archive
Posts: 12542
Joined: Thu Dec 14, 2006 9:12 pm
Location: From the old forum

Trailer [Bob]

Post by Archive »

Bob replied:

Hi Keith,
The thing to do is to use a second hand Dart 18 trailer made for taking the boat broken down. Stuart Snell does this. The boat does not go on top of the box - there are arms which the hulls slide onto in the holes for the beams. When these trailers are used for the Sprint 15 only one of these arms goes inside the hole for the (front) beam and the hull has to be tied down on top of the rear arm. It works OK like that.
Cheers
Bob
Top
Post Reply

Return to “Dart 15”