The UK Dart 15 Association

Dart 15 Forums

Dart 15 Association

Comments on this site are not necessarily the opinion of the Dart 15 committee.
Comments are not moderated and people's screen names may not be accurate.

Skip to content

Bent Mast

Dart 15 Chat
Post Reply
Derek James
Sub Lieutenant
Sub Lieutenant
Posts: 115
Joined: Tue Jul 10, 2007 7:42 pm
Location: Draycote Water

Bent Mast

Post by Derek James »

Is it possible to remove a slight bend from a single piece mast ? We have a club boat at Draycote with a very gentle bend in the mast . We have tried resting it between two benches and jumping on it but to no effect . Any tips on mast straightening would be appreciated 👍
Derek ( Dray cat ) Sprint 1744
Top
Javier
Able Seaman
Able Seaman
Posts: 7
Joined: Mon Mar 29, 2021 2:48 pm

Re: Bent Mast

Post by Javier »

I’ve not tried it myself but Joe from Joyrider TV YouTube channel has a video about the topic:

https://youtu.be/4YVQDNdBhYg?si=e0IFq0BJgBKcV7nV

The channel is a gem, by the way.

I hope it helps
Top
Mark Aldridge
Vice Admiral
Vice Admiral
Posts: 383
Joined: Tue Feb 26, 2008 6:16 pm
Location: Grafham - of course!

Re: Bent Mast

Post by Mark Aldridge »

Probably all you can realistically do Derek is put it between 2 points as the vid' shows and over bend it so it then returns to staight(ish).

Unless it's got a crack in the hound fitting weld which I've seen before. George Carter used to put so much downhaul on he broke them there!
Mark Aldridge
Top
Derek James
Sub Lieutenant
Sub Lieutenant
Posts: 115
Joined: Tue Jul 10, 2007 7:42 pm
Location: Draycote Water

Re: Bent Mast

Post by Derek James »

Thanks for suggestions .....the video is great and makes it look so easy ......I suspect Dart masts are a bit stiffer but will give it a go . Cheers Javier and Mark
Derek ( Dray cat ) Sprint 1744
Top
Post Reply

Return to “Dart 15”

cron