Page 1 of 1
How to fix corroded mast
Posted: Mon Oct 03, 2022 8:06 pm
by Avon
Hi, after taking 40 minutes to right my fully inverted boat (sail no 1344) I discovered that the top section was flooded. Having now looked at the mast I see that it has corrosion holes on both sides. I’m thinking that a good way to repair it will be to epoxy glue 1.5mm aluminium plates over the areas. I wonder if anyone can comment on whether araldite will be ok or suggest the best glue for the job.
Many thanks.
Peter
Re: How to fix corroded mast
Posted: Tue Oct 04, 2022 3:48 pm
by Bob Carter
That sounds serious. I would start by using duck tape. At least it will not catch on/ tear the sails like an aluminium plate would. It might give your mast a bit more life. It could give you time to save up for a replacement mast, even if it is second hand one. After all if your mast is the original it is 33 years old.
Re: How to fix corroded mast
Posted: Thu Oct 06, 2022 7:38 am
by Charles
Hi Peter
Where are the holes? Are they at fixing holes? Can you post pictures?