The UK Dart 15 Association

Dart 15 Forums

Dart 15 Association

Comments on this site are not necessarily the opinion of the Dart 15 committee.
Comments are not moderated and people's screen names may not be accurate.

Skip to content

Plastic Batten Ends [Robert England]

Dart 15 Chat
Post Reply
Archive
Archive
Posts: 12542
Joined: Thu Dec 14, 2006 9:12 pm
Location: From the old forum

Plastic Batten Ends [Robert England]

Post by Archive »

Robert England wrote:

I like the proposal by Keith Newnham and Chris Read for plastic batten ends to be made class legal. Being a newbie I take a long time to set my boat up and these would be a great help. I have tried to locate a supplier of these for cruising - can anyone point me in the right direction, please?
Top
Archive
Archive
Posts: 12542
Joined: Thu Dec 14, 2006 9:12 pm
Location: From the old forum

Batten Ends [Bob]

Post by Archive »

Bob replied:

Hi Bob,
Windsport can get them for you.
Cheers
Bob
Top
Archive
Archive
Posts: 12542
Joined: Thu Dec 14, 2006 9:12 pm
Location: From the old forum

Batten Ends supply [Robert England]

Post by Archive »

Robert England replied:

Thanks Bob. I did ask them for some but they said that they don't stock them yet as they aren't class legal. I'll try pressing them a bit harder!
Top
Archive
Archive
Posts: 12542
Joined: Thu Dec 14, 2006 9:12 pm
Location: From the old forum

Batten End Suppliers [Charles]

Post by Archive »

Charles replied:

The ends are made by Bainbridge International, but they will only sell to the trade & in minimum of 100, I had to assure my local chandler that 2 other owners were intrested at my club to make it worth him getting in the stock, as it happened 6 owners now have them, so it wasn't a problem.
Top
Post Reply

Return to “Dart 15”